RainCatcher Wall Mounted Water Butt - 160 Litres



In stock
FREE Standard Delivery 2 - 4 working days
Exceptions & regional surcharges may apply

Found In:

Water Butts


This RainCatcher Wall Mounted Water Butt can store up to 160 litres of water. When full simply turn the tap in order to fill watering cans, containers or buckets.

The recycled water is perfect for washing the car, watering plants, or cleaning paths and patios. It is also useful for times of drought and during hose pipe bans.

  • Suitable for 68 round or 65 square downpipes
  • Made from 100% recycled and recyclable plastic
  • Diverter included
  • Childproof lid
  • Space saving design
  • Wall mounted using brackets, screws and rawl plugs. All included

Capacity:160 Litres

Dimensions: W45cm x 30cm x H122cm

Login to Post Review


Very smart and efficient kathryn9 on 22 October 2018

So far good. Arrived promptly and fits perfectly into the small gap available. Looks 100% better than our old fashioned water butt. Has collected a lot of rain efficiently and the tap works fine. As long as it endures over time it will be an excellent purchase.

very useful item fredtheoyster on 20 July 2012

The idea of this is good. The fitting is relatively easy, although care is needed to ensure that the levels are correct, both of the brackets and the water divertor. My main concern was that the tap did not seal properly, the washer provided was hard and the tap appeared to come up tight facing the wrong way (ie upwards!) fortunately I had an old tap with its washer and the additional washer, which even after years in use, was still softer than the provided one, solved the problem. I would say beware of following the divertor instructions too literally as it will result in the tank overfilling. Better to have a little less water and try to keep the level below the top fixing bolts as this will avoid any leakage through the holes onto the wall, which obviously is not a good thing.


This and similar products can be found in: Water Butts