Ask a question about ...
Cannock Softwood Gate Post
Dig a trench that should be 15cm or 6 inches wider than the post and 91.44cm or 3 feet deep at the ends. Put two to three inches of gravel in the bottom of the trench for drainage and set the posts into the trench. Mix concrete and pour into trench and make sure gates are kept level by using boards or lengths of wood to hold them in place.
Softwood Post: 10x10x183cm high. (4”x4”x6’ ft high.)
Please note this product is just 1 post, not the gate in the picture.